Fix atom47 keyboard revision naming (#3013)

* Fixed Atom47 revisions, rev1 is rev3

* Remove rev1 folder

* Added bootloader to info.json

* Renamed layout

* Change readme for atom47

* Remove bootloader line from info.json

keyboards/atom47/rev3/config.h

@@ -0,0 +1,69 @@
+/*
+Copyright 2012 Maarten Dekkers <atomkeeb@gmail.com
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef REV3_CONFIG_H
+#define REV3_CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6060
+#define DEVICE_VER      0x0003
+#define MANUFACTURER    Vortex
+#define PRODUCT         Core
+#define DESCRIPTION     Atom47 PCB for the Vortex Core Rev.3
+
+/* key matrix size */
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 13
+
+// ROWS: Top to bottom, COLS: Left to right
+
+#define MATRIX_ROW_PINS {B3,B2,B1,B0}
+#define MATRIX_COL_PINS {B7,F0,F1,F4,F6,D4,D6,D7,B4,B5,C6,C7,F7}
+#define UNUSED_PINS
+
+#define BACKLIGHT_PIN B6
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* Backlight configuration
+ */
+#define BACKLIGHT_LEVELS 4
+
+#define RGB_DI_PIN F5    // The pin the LED strip is connected to
+#define RGBLED_NUM 6     // Number of LEDs in your strip
+
+#define QMK_ESC_OUTPUT B7 // usually COL
+#define QMK_ESC_INPUT B3 // usually ROW
+#define QMK_LED E6
+
+#endif

keyboards/atom47/rev3/info.json

@@ -0,0 +1,12 @@
+{
+  "keyboard_name": "Atom47", 
+  "url": "https://atomkb.eu/atom47", 
+  "maintainer": "Maarten Dekkers", 
+  "width": 13, 
+  "height": 4, 
+  "layouts": {
+    "LAYOUT_ansi": {
+      "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":0, "y":1, "w":1.25}, {"x":1.25, "y":1}, {"x":2.25, "y":1}, {"x":3.25, "y":1}, {"x":4.25, "y":1}, {"x":5.25, "y":1}, {"x":6.25, "y":1}, {"x":7.25, "y":1}, {"x":8.25, "y":1}, {"x":9.25, "y":1}, {"x":10.25, "y":1}, {"x":11.25, "y":1, "w":1.75}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2, "w":1.25}, {"x":12, "y":2}, {"x":0, "y":3, "w":1.25}, {"x":1.25, "y":3}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3, "w":1.75}, {"x":6, "y":3, "w":2.75}, {"x":8.75, "y":3}, {"x":9.75, "y":3}, {"x":10.75, "y":3}, {"x":11.75, "y":3, "w":1.25}]
+    }
+  }
+}

keyboards/atom47/rev3/rev3.c

@@ -0,0 +1,24 @@
+#include "rev3.h"
+#include "led.h"
+
+void matrix_init_kb(void) {
+	// put your keyboard start-up code here
+	// runs once when the firmware starts up
+	matrix_init_user();
+	led_init_ports();
+};
+
+void matrix_scan_kb(void) {
+	// put your looping keyboard code here
+	// runs every cycle (a lot)
+	matrix_scan_user();
+};
+
+void led_init_ports(void) {
+    // * Set our LED pins as output
+    DDRE |= (1 << 6);
+}
+
+void led_set_kb(uint8_t usb_led) {
+    led_set_user(usb_led);
+}

keyboards/atom47/rev3/rev3.h

@@ -0,0 +1,23 @@
+#ifndef ATOM47_REV3_H
+#define ATOM47_REV3_H
+
+#include "quantum.h"
+
+// readability
+#define XXX KC_NO
+
+#define LAYOUT( \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, \
+	k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a,      k1c, \
+	k20,      k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, \
+	k30, k31, k32, k33,      k35,      k37,      k39, k3a, k3b, k3c \
+) \
+{ \
+    {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c}, \
+	{k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, XXX, k1c}, \
+	{k20, XXX, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c}, \
+	{k30, k31, k32, k33, XXX, k35, XXX, k37, XXX, k39, k3a, k3b, k3c}  \
+}
+
+
+#endif

keyboards/atom47/rev3/rules.mk

@@ -0,0 +1,2 @@
+NKRO_ENABLE = no		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+RGBLIGHT_ENABLE = yes   # Enable keyboard underlight functionality (+4870)