diff --git a/keyboards/lotus/factory.c b/keyboards/lotus/factory.c
index d9f332e2dd..1800498aa8 100644
--- a/keyboards/lotus/factory.c
+++ b/keyboards/lotus/factory.c
@@ -7,15 +7,7 @@
 enum factory_commands {
     f_bootloader    = 0x00,
     f_emu_keypress  = 0x01, // Next byte is keycode
-    f_backlight     = 0x02, // Next byte is on/off boolean
     f_adc           = 0x03, // ADC trigger
-    // RGB control
-    f_rgb_enable    = 0x04, // Enable RGB
-    f_rgb_dimmer    = 0x05, // RGB brightness lower
-    f_rgb_brighter  = 0x06, // RGB brightness higher
-    f_rgb_cycle_hue = 0x0A, // Cycle through the hues
-    f_rgb_next      = 0x0B, // Next RGB pattern
-    f_rgb_prev      = 0x0C, // Previous RGB pattern
 };
 
 void handle_factory_command(uint8_t *data) {
@@ -32,59 +24,9 @@ void handle_factory_command(uint8_t *data) {
             uprintf("Emulating keycode: %u\n", command_data[0]);
             tap_code(command_data[0]);
             break;
-        case f_backlight:
-            // Need a separate command because tap_code won't work for
-            // commands larger than 1 byte. The extra byte in tap_code16
-            // is just for modifiers.
-            uprintf("backlight: %u\n", command_data[0]);
-            if (command_data[0] == 0) {
-                backlight_disable();
-            } else {
-                backlight_enable();
-            }
-            break;
         case f_adc:
             factory_trigger_adc();
             break;
-#ifdef RGB_MATRIX_ENABLE
-        case f_rgb_enable:
-            print("rgb factory enable&solid\n");
-            rgb_matrix_enable();
-            rgb_matrix_mode(RGB_MATRIX_SOLID_COLOR);
-            break;
-        case f_rgb_dimmer:
-            print("RGB dimmer\n");
-            rgb_matrix_decrease_val();
-            break;
-        case f_rgb_brighter:
-            print("RGB brighter\n");
-            rgb_matrix_increase_val();
-            break;
-        // Don't seem to work, not sure why
-        //case 7:
-        //    print("RGB red\n");
-        //    rgb_matrix_set_color_all(255, 0, 0);
-        //    break;
-        //case 8:
-        //    print("RGB green\n");
-        //    rgb_matrix_set_color_all(0, 255, 0);
-        //    break;
-        //case 9:
-        //    print("RGB blue\n");
-        //    rgb_matrix_set_color_all(0, 0, 255);
-        //    break;
-        case f_rgb_cycle_hue:
-            print("rgb_matrix_increase_hue\n");
-            rgb_matrix_increase_hue();
-        case f_rgb_next:
-            print("rgb_matrix_step\n");
-            rgb_matrix_step();
-            break;
-        case f_rgb_prev:
-            print("rgb_matrix_step_reverse\n");
-            rgb_matrix_step_reverse();
-            break;
-#endif
         default:
             uprintf("Unknown factory command: %u\n", factory_command_id);
             break;