8d8f9c7f6f
It needs different firmware from the factory, so we need to distinguish it from software in order to be able to update it correctly. Signed-off-by: Daniel Schaefer <dhs@frame.work>
146 lines
4.7 KiB
C
146 lines
4.7 KiB
C
// Copyright 2022 Framework Computer
|
|
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
|
|
#pragma once
|
|
|
|
// Allow (emulated) EEPROM reset using VIA
|
|
#define VIA_EEPROM_ALLOW_RESET
|
|
|
|
#define DYNAMIC_KEYMAP_LAYER_COUNT 10
|
|
|
|
// Increase to 16K for more storage space
|
|
// With 64K backing size, this spread the wear level over 4 blocks
|
|
#define WEAR_LEVELING_LOGICAL_SIZE (4*4096)
|
|
// Increase to 64K backing size to allow more wear leveling
|
|
#define WEAR_LEVELING_BACKING_SIZE (16 * 4096)
|
|
// We use 1MB flash
|
|
#define PICO_FLASH_SIZE_BYTES (1 * 1024 * 1024)
|
|
#define WEAR_LEVELING_RP2040_FLASH_SIZE PICO_FLASH_SIZE_BYTES
|
|
// Keep the last 4K sector free for the serial number
|
|
#define WEAR_LEVELING_RP2040_FLASH_BASE ((PICO_FLASH_SIZE_BYTES) - (WEAR_LEVELING_BACKING_SIZE + 4096))
|
|
|
|
|
|
// Prints every second how many matrix scans were done (Frequency in Hz)
|
|
// Only during debugging, since it prevents the host from going to sleep
|
|
//#define DEBUG_MATRIX_SCAN_RATE
|
|
|
|
// Prototype for Framework Laptop 16 with Raspberry Pi Pico
|
|
// It'll disable column drive because we need to remap some pins to there
|
|
// SDB is mapped to GP22
|
|
//#define PICO_FL16
|
|
|
|
// Enable serial number. Calls into dyn_serial_number_string* functions
|
|
#define SERIAL_NUMBER
|
|
|
|
#if KEYBOARD_framework_ansi
|
|
#define LED_CAPS_LOCK_PIN GP24
|
|
#elif KEYBOARD_framework_copilot
|
|
#define LED_CAPS_LOCK_PIN GP24
|
|
#elif KEYBOARD_framework_iso
|
|
#define LED_CAPS_LOCK_PIN GP24
|
|
#elif KEYBOARD_framework_jis
|
|
#define LED_CAPS_LOCK_PIN GP24
|
|
#elif KEYBOARD_framework_numpad
|
|
#define LED_NUM_LOCK_PIN GP24
|
|
#elif KEYBOARD_framework_macropad
|
|
#endif
|
|
|
|
// PWM single one backlight configuration
|
|
// GPIO25 maps to PWM channel 4B of the RP2040
|
|
// On the Raspberry Pi Pico this is the green LED on the board, good for prototyping
|
|
#define BACKLIGHT_PWM_DRIVER PWMD4
|
|
#define BACKLIGHT_PWM_CHANNEL RP2040_PWM_CHANNEL_B
|
|
#define BACKLIGHT_BREATHING
|
|
// Change PWM frequency to 24kHz, the default of 2048Hz causes loud noise
|
|
#define BACKLIGHT_PWM_PERIOD BACKLIGHT_PWM_COUNTER_FREQUENCY / 24000
|
|
|
|
// I2C for the RBG controller
|
|
#define I2C_DRIVER I2CD1
|
|
#define I2C1_SDA_PIN GP26
|
|
#define I2C1_SCL_PIN GP27
|
|
|
|
// RGB config
|
|
|
|
// Turn off RGB LED when USB suspended
|
|
#define RGB_DISABLE_WHEN_USB_SUSPENDED
|
|
|
|
// RGB Matrix Animation modes. Explicitly enabled
|
|
// For full list of effects, see:
|
|
// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects
|
|
// 0 = Off
|
|
// 1 = Solid Color
|
|
// 2
|
|
#define ENABLE_RGB_MATRIX_ALPHAS_MODS
|
|
#define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN
|
|
#define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT
|
|
#define ENABLE_RGB_MATRIX_BREATHING
|
|
#define ENABLE_RGB_MATRIX_BAND_SAT
|
|
#define ENABLE_RGB_MATRIX_BAND_VAL
|
|
#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT
|
|
#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL
|
|
// 10
|
|
#define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT
|
|
#define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL
|
|
#define ENABLE_RGB_MATRIX_CYCLE_ALL
|
|
#define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT
|
|
#define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN
|
|
#define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON
|
|
#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN
|
|
#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL
|
|
#define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL
|
|
#define ENABLE_RGB_MATRIX_CYCLE_SPIRAL
|
|
// 20
|
|
#define ENABLE_RGB_MATRIX_DUAL_BEACON
|
|
#define ENABLE_RGB_MATRIX_RAINBOW_BEACON
|
|
#define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS
|
|
#define ENABLE_RGB_MATRIX_RAINDROPS
|
|
#define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS
|
|
#define ENABLE_RGB_MATRIX_HUE_BREATHING
|
|
#define ENABLE_RGB_MATRIX_HUE_PENDULUM
|
|
#define ENABLE_RGB_MATRIX_HUE_WAVE
|
|
#define ENABLE_RGB_MATRIX_PIXEL_RAIN
|
|
#define ENABLE_RGB_MATRIX_PIXEL_FLOW
|
|
// 30
|
|
#define ENABLE_RGB_MATRIX_PIXEL_FRACTAL
|
|
|
|
#define RGB_MATRIX_FRAMEBUFFER_EFFECTS
|
|
// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined
|
|
#define ENABLE_RGB_MATRIX_TYPING_HEATMAP
|
|
#define ENABLE_RGB_MATRIX_DIGITAL_RAIN
|
|
|
|
|
|
#define RGB_MATRIX_KEYPRESSES
|
|
// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined
|
|
// 33
|
|
#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE
|
|
#define ENABLE_RGB_MATRIX_SOLID_REACTIVE
|
|
#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE
|
|
#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE
|
|
#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS
|
|
#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS
|
|
#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS
|
|
// 40
|
|
#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS
|
|
#define ENABLE_RGB_MATRIX_SPLASH
|
|
#define ENABLE_RGB_MATRIX_MULTISPLASH
|
|
#define ENABLE_RGB_MATRIX_SOLID_SPLASH
|
|
#define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH
|
|
|
|
#define ISSI_CUSTOM_PWM_FREQ
|
|
|
|
/*
|
|
* Feature disable options
|
|
* These options are also useful to firmware size reduction.
|
|
*/
|
|
|
|
/* disable debug print */
|
|
//#define NO_DEBUG
|
|
|
|
/* disable print */
|
|
//#define NO_PRINT
|
|
|
|
/* disable action features */
|
|
//#define NO_ACTION_LAYER
|
|
//#define NO_ACTION_TAPPING
|
|
//#define NO_ACTION_ONESHOT
|